0x08908BB4: "Failed -> Error %08X loading module nan

General, off-topic discussion about things of interest to the members of these forums.

Moderator: cheriff

Post Reply
NetWalker
Posts: 3
Joined: Wed May 07, 2008 1:55 pm
Location: Brazil

0x08908BB4: "Failed -> Error %08X loading module nan

Post by NetWalker »

Folks ,

I got an Error trying to load a cfw and I don't know why..

I've running the Pandora + CFW for many PSP but I got one that contain the original Sony 3.93
and it stops witha 80020231 error Loading nand_updater.

When I DISASM the resurrection.elf I was able to find the address:

0x08908B78 - 00 00 00 00 | 4C 6F 61 64 | 69 6E 67 20 | 75 70 64 61 - ....Loading upda
0x08908B88 - 74 65 72 20 | 6D 6F 64 75 | 6C 65 73 2E | 2E 2E 20 00 - ter modules... .
0x08908B98 - 6D 73 30 3A | 2F 6B 64 2F | 6E 61 6E 64 | 5F 75 70 64 - ms0:/kd/nand_upd
0x08908BA8 - 61 74 65 72 | 2E 70 72 78 | 00 00 00 00 | 46 61 69 6C - ater.prx....Fail
0x08908BB8 - 65 64 20 2D | 3E 20 45 72 | 72 6F 72 20 | 25 30 38 58 - ed -> Error %08X
0x08908BC8 - 20 6C 6F 61 | 64 69 6E 67 | 20 6D 6F 64 | 75 6C 65 20 - loading module
0x08908BD8 - 6E 61 6E 64 | 5F 75 70 64 | 61 74 65 72 | 0A 00 00 00 - nand_updater....

and


0x08908B7C: "Loading updater modules... "
0x08908B98: "ms0:/kd/nand_updater.prx"
0x08908BB4: "Failed -> Error %08X loading module nand_updater\n"


... but I don't know how to proceed...

Does anyone could help me to understand whats going on ??

Thank you in advance.
Sds,
--------------------------------
NetWalker
J.F.
Posts: 2906
Joined: Sun Feb 22, 2004 11:41 am

Post by J.F. »

We don't normally discuss putting custom firmware on the PSP, but from the error, you don't have the proper software on the memory stick. I suggest you hop over to MaxConsole and go through their sticky threads on installing custom firmware and pandora.

http://forums.maxconsole.net/showthread.php?t=78542
http://forums.maxconsole.net/showthread.php?t=82963
NetWalker
Posts: 3
Joined: Wed May 07, 2008 1:55 pm
Location: Brazil

Post by NetWalker »

Yes, I know about the rule...

I believe that I made some mistake backing up and recovering NAND...

I will follow the procedures again and see whats happen.. .thank you..
Sds,
--------------------------------
NetWalker
Post Reply