arthur92710 wrote:thanks for your help.
I am looking for a network adapter so that I can do the stuff you mentioned.
Good, but remember that you can do some stuff without it too, as I described earlier.
I really want to try out ULE but you say that it has to be properly burnt. How can I make sure that it is properly burnt?
I will reply to that, but many others here would not. You see, this site is intended exclusively for PS2 homebrew developers. And you just proved yourself to be very far from becoming one. (Or you'd already know how to make boot CD's.) But whatever, let's get on with it...
First you need a working ISO to burn, and since you're a newb you're most likely unable to make one based on the uLE release package, so you want one ready for burning. As usual in these cases 'Google is your friend...', so make a normal google search using the followin search string:
PS2 uLE 4.12 boot CD ISO
That should give you a number of interesting hits, but the most relevant ones are likely to be those at psx-scene, since that is the home site of uLE.
In case something goes wrong with your search, here's a
direct link to a thread with a useful uLE boot CD in one of the ZIP attachments of the second post.
Ignore all mention of DEV2 stuff as it doesn't apply to your modchip, since you mentioned it has no (installable) firmware.
Once you have the uLE zip file, unpack it to get the iso file inside. This is what you need to burn to the CD, but not as a normal file put inside the 'compose' window of any CD burning program. No. Instead this single file must be used as a template for the entire CD (nevermind the small size, it works this way).
For the rest of my example I'll be using Nero 8.0.3.0, simply because that's what I use myself.
First off, you must make sure that you're not using the worthless "Nero Express" mode with all of the silly 'wizards'. None of them can help you burning clean ISOs. So all such nonsense must be turned off and/or disabled, and left so permanently, for ever... (I kid you not. All that stuff is just eye-candy that in fact diminishes functionality.
With that fixed, exit and restart the 'real' Nero program, which should result in a single window entitled "Nero Burning ROM", and nothing else...
At this point, if you were composing a PC CD, you would use the 'File' / 'New' command, but you already have a properly composed non-PC CD iso, so that would be wrong. Instead you should click the 'Recorder' entry in the main menu, and in the resulting pulldown menu you should click the entry "Burn Image...".
That will open a Windows Explorer file selector which you should navigate to the folder where you unpacked the iso file earlier, and now select that iso file and exit the file selector using the 'Open' button. You should then get a burning dialog box with a few commands and options of interest.
Btw: This is a good point to insert the empty CD-R if you didn't do so from the start, since you will be burning it soon.
All the options of interest are in the 'Burn' tag, so ignore the 'Info' tag.
Many options may already have correct settings in which case there's no reason to change them (obviously)
Uncheck "Determine maximum speed" (I don't trust the program to get it right for all cases)
Uncheck "Simulation" (as you want to burn a real disc)
Check "Write" (since that's what you want done)
Check "Finalize disc" (as PS2 boot discs must be single session)
In the next section of settings:
Set "Write speed:" to the lower of the two max speeds that apply to the burner itself and to the CD-R discs you bought.
Btw: I assume high quality media (eg: Verbatim, the only brand I use myself, both for CD and DVD), which *always* work fine burned at their max speed. The same is NOT true about cheap knock-offs which may need speeds much lower than the claimed max speed.
Set "Write method:" to "Track-at-once" ("Disc-at-once" should also work)
Set "Number of copies:" to 1
Check "Buffer underrun protection" (if available for your burner)
Uncheck "Multiple Recorders"
With all choices set up as described, simply click the "Burn" button at the bottom of the box, to start the physical burning process. When that process completes your brand new boot disc is ready for testing in the PS2. (But don't forget to label it as being "uLE v4.12 Boot CD")
Finally I advice you to switch over to that 'psx-scene' site I linked to above, since that site is open to all comers, unlike this one. And that site is also the 'home' of uLE where I and the other main codeveloper of uLE ("E P") moderate a forum dedicated to the program.
Best regards: dlanor