PlayTV - Techical Informations where to found it ?

Technical discussion on the newly released and hard to find PS3.

Moderators: cheriff, emoon

Post Reply
caviar44
Posts: 7
Joined: Mon Jan 28, 2008 2:59 am

PlayTV - Techical Informations where to found it ?

Post by caviar44 »

Hi All,
Is there some technical informations about PlayTV ?
Do you know if this hardware is base on some other hardware device?

I suppose that right now, there is no driver available for Windows or Linux

the only information I found are
1- NAME of the USB Device : SCEH-0036

2 USB View return description
Device Descriptor:
bcdUSB: 0x0200
bDeviceClass: 0x00
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x40 (64)
idVendor: 0x1415
idProduct: 0x0003
bcdDevice: 0x0100
iManufacturer: 0x01
iProduct: 0x02
iSerialNumber: 0x03
bNumConfigurations: 0x01

ConnectionStatus: DeviceConnected
Current Config Value: 0x00
Device Bus Speed: High
Device Address: 0x01
Open Pipes: 0

3 Windows XP Device description
USB Id : USB\VID_1415&PID_0003\ALR001FFSP

Advance Logic Research Device ?

4 - Chipsets :

- 2x DibCom DvB
ref : 7070PB1 - AXGXba-G-a
QHF1T
D3KTC 1
0803-1010-C
- 1 Dibcom
0700C-XCxxa-G
USB 2.0
D3L JW 1
0801-100C

the SCEH-0036 seems to have the same components as the Emtec 810S DVB-T device ?

caviar44
Last edited by caviar44 on Sat Mar 28, 2009 7:48 am, edited 1 time in total.
digihoe
Posts: 108
Joined: Sat May 14, 2005 7:40 pm

Post by digihoe »

I was looking at this site http://www.dibcom.info/Website/site/eng ... hipset.htm is the chip used DIB7070-P, or is it not on that list? Would be good to know if output from the chip is USB or MPEG2-TS...

Does anyone know of an injection method for MPEG2-TS BTW...
ps3fanboy
Posts: 66
Joined: Sun Jul 06, 2008 2:03 am

Post by ps3fanboy »

this is what dmesg says when you hook it up to linux:
usb 1-2.4: new high speed USB device using ps3-ehci-driver and address 7
usb 1-2.4: configuration #1 chosen from 1 choice
T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=04 Dev#= 7 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=1415 ProdID=0003 Rev= 1.00
S: Manufacturer=SONY
S: Product=SCEH-0036
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
caviar44
Posts: 7
Joined: Mon Jan 28, 2008 2:59 am

Post by caviar44 »

Hi all,

interesting information here to run it under windows or linux :

http://www.elotrolado.net/hilo_playtv-f ... ws_1188041

windows driver here :
http://dl.free.fr/q0vL9gkvJ

here is a Windows TNT TV Player which work well with the PlayTV
http://pouchinteve.free.fr/

(do no forget to install DSCaler 5)
http://deinterlace.sourceforge.net/

caviar
Post Reply