PSP New Ver. HardWare

0okm0000 · Post by **0okm0000** » Thu May 18, 2006 11:21 am

PCB Ver. : TA-082
CPU Core : CXD2967GG
Media Engine : CXD5026-203GG

dot_blank · Post by **dot_blank** » Fri May 19, 2006 4:32 am

thanx will keep an eye out :)

Viper8896 · Post by **Viper8896** » Sun May 21, 2006 8:12 am

do u know what they did diferently?

0okm0000 · Post by **0okm0000** » Sun May 21, 2006 10:54 am

in new ver PSP (new Hardware:Chipset, MCP...)
it use new "protection"
maybe w/ new bootloader ?
so it can not use old ver FW
if you paste old ver FW in it
it will not boot

new ver PSP (Hardware:Chipset, MCP...)
it just can Upgrade
and can not Downgrade !!

dot_blank · Post by **dot_blank** » Sun May 21, 2006 1:37 pm

um...what do you mean by you cannot paste :P
im assuming you mean reflash the nand with an
older firmware ....and that hardware does not allow

0okm0000 · Post by **0okm0000** » Mon May 22, 2006 3:15 am

dot_blank wrote:um...what do you mean by you cannot paste :P
im assuming you mean reflash the nand with an
older firmware ....and that hardware does not allow

yes ^o^

moonlight · Post by **moonlight** » Mon May 22, 2006 3:27 am

0okm0000, interesting program the 1.00 backup and restorer :)

Just tried the backup one in my 1.50 :D But obviously i wont try the restorer, i'm not that suicidal yet.

0okm0000 · Post by **0okm0000** » Mon May 22, 2006 3:46 am

moonlight wrote:0okm0000, interesting program the 1.00 backup and restorer :)

Just tried the backup one in my 1.50 :D But obviously i wont try the restorer, i'm not that suicidal yet.

sorry
this program now just for fw1.00
if you havn't your own fw1.0 data the restorer will not work ^^

FW1.00 DIE HARD TRILOGY v1.00

FW1.00_DIE_HARD_TRILOGY.rar

NOTE :
　This is NOT a Downgrade Program
　This Program just for FW1.00 User to Backup & Restore their FW1.00

CAUTION :
　人柱版。实验用。超危险。无保证，责任自负。
　任何事也会发生。最好避免使用。
　安全出口 → http://www.playstation.jp/psp/

　人柱版。實驗用。超危險。無保証，責任自負。
　任何事也會發生。最好避免使用。
　安全出口 → http://www.playstation.jp/psp/

　人柱版。実験用。超危険。無保証自己責任。
　なにが起きても知りません。避けて通るのが吉。
　非常出口 → http://www.playstation.jp/psp/

　To sacrifice yourself. Experimental. Extremely dangerous.
　No warranty. Use on your own risk and responsibility.
　Anything may happen. We recommend you to avoid seeing/downloading/using this.
　Emergency exit -> http://www.playstation.jp/psp/
　* this CAUTION copy from SEC(nem) :p

How-To :
　Restore Your FW1.00 to "Default Setting"
　Use FW1.00B(FW1.00 Backup Tools) to Backup Your FW1.00
　Update Your PSP to FW1.50
　Use FW1.00R(FW1.00 Restore Tools) to Restore Your PSP to FW1.00

FAQ :
　Q : Why the Tools say "Fatal error: Power NOT Online or Battery NOT Exist or BatteryLife < 50%" ?
　A : When you Restore Your PSP FW, you need to Connect the AC adaptor & with BatteryLife > 50%,
　　　Otherwise the Tools will Terminate.

　Q : Why the Tools say "Fatal error: BadBlock find, Terminate" ?
　A : Because this Tools NOW not support NAND Flash had BadBlock, so the Tools will Terminate.

　Q : Why the Tools say "Fatal error: FW Data NOT Matched" ?
　A : Because this Tools just for Backup & Restore your own PSP with FW1.00,
　　　so you can't use other PSP's DATA.

Extract Password is : I agree use this program at My own RISK!

moonlight · Post by **moonlight** » Mon May 22, 2006 3:55 am

0okm0000 wrote:
moonlight wrote:0okm0000, interesting program the 1.00 backup and restorer :)

Just tried the backup one in my 1.50 :D But obviously i wont try the restorer, i'm not that suicidal yet.
sorry
this program now just for fw1.00
if you havn't your own fw1.0 data the restorer will not work ^^

Yes, i know, but anyways i wanted to test the nand dumper :)
Even if it were for 1.50 i wouldn't try the restorer :D

dot_blank · Post by **dot_blank** » Mon May 22, 2006 8:52 am

nice backup tool/restorer/updater 0okm :)

Alcahest · Post by **Alcahest** » Mon May 22, 2006 12:04 pm

I don't understand.
After backing up firmware 1.00 and flashing firwmare 1.50.
Then basically the PSP will become like any other 1.50 PSPs will it not?
In this case, why wouldn't anyone with a 1.50 be able to downgrade?
Sorry for trying to see deep into this but I have a PSP 1.00 and I'm highly interested in this tool but am a bit afraid to be the guinea pig. ^^;;
Later,

Alcahest

dot_blank · Post by **dot_blank** » Mon May 22, 2006 12:26 pm

sounds to me like he plays around with idstorage maybe ;)

0okm0000 · Post by **0okm0000** » Mon May 22, 2006 4:22 pm

Alcahest wrote:I don't understand.
After backing up firmware 1.00 and flashing firwmare 1.50.
Then basically the PSP will become like any other 1.50 PSPs will it not?
In this case, why wouldn't anyone with a 1.50 be able to downgrade?
Sorry for trying to see deep into this but I have a PSP 1.00 and I'm highly interested in this tool but am a bit afraid to be the guinea pig. ^^;;
Later,

Alcahest

Make a Downgrader with Unofficial NAND Flash Write is Very Very Dangerous !!

0okm0000 · Post by **0okm0000** » Thu Jun 01, 2006 3:19 pm

PSP new ver. hardware(TA-082) use 1.8V/1.8V MCP
K5E5658ACM-D060 (Upper)
K5E5658HCM-D060 (Lower)

0okm0000 · Post by **0okm0000** » Fri Jun 09, 2006 8:08 pm

PSP New Ver. HardWare (from PSP1006CW)

PCB Ver. : TA-082
CPU Core : CXD2967GG
Media Engine : CXD5026-203GG
MCP : K5E5658ACM-D060 1.8V/1.8V